A humidified high-flow system designed to treat patients across the care continuum.
The AIRVO 2 is a humidifier with integrated flow generator that delivers high flow warmed and humidified respiratory gases to spontaneously breathing patients though a variety of patient interfaces.
The AIRVO 2is for the treatment of spontaneously breathing patients who would benefit from receiving high flow warmed and humidified respiratory gasses. This includes patients who have had upper airways bypassed. The flow may be from 2-60L/min depending on the patient interface.
Proven Optiflow high flow therapy has been proven to be an effective therapy for: acute hypoxemia respiratory failure post-extubation respiratory support post-operative respiratory support immunocompromised patients with acute hypoxemia patients with COPD.
Broad flow range A broad flow range (2 to 60 L/min) takes your patients from the most acute environments (ICU and ED) to the home.
Transportable A compact system with a built-in flow generator means there’s no need for a noisy, heavy air compressor to transport the Airvo 2. Add a suitable UPS, and you’re ready to go.
Variety of interfaces A variety of interfaces have been designed with Optiflow High Flow Therapy in mind.
1. Controlled oxygen Add and titrate oxygen separately from the flow rate. From .21 (room air) to 1.0. Onscreen FiO2 display. 2. 93% less condensate* AirSpiral™ heated breathing tube with integrated dual-spiral heated wires and temperature sensor. No separate temperature probes or adapters are required. * When compared with the 900PT501 Airvo tube in internal Fisher & Paykel Healthcare testing. 3. Adjustable temperature Three temperature settings (37, 34, 31 °C) help achieve comfort and compliance. 4. Transportable Mobile pole, oxygen bottle holders, and transport kit designed for a UPS.
Includes: HC360 chamber and heated breathing tube.
295 mm x 170 mm x 175 mm (11.6" x 6.7" x 6.9")
4.8 lb - unit only; 7.5 lb packaged
Complies with ISO 8185:2007 standard
10 to 60 L/min (increments 5 L/min) - default
2 to 25 L/min (increments 1 L/min) - junior mode
F&P Optiflow+ nasal cannulas
>35 mg/L at 37°C target >12 mg/L at 34°C target >12 mg/L at 31°C target
Warm up time
10 minutes to 31°C (88 °F) 30 minutes to 37°C (98.6 “F) Using a MR290 chamber with of 35 L/min an starting temperature 23 + 2 °C
Sound pressure level
Alarms exceed 45dbA @ 1m
Auditory alarm Pressure
Expected service life
Target temperature settings
37, 34, 31 °C
Maximum temperature of delivered gas
43 °C (109 °F)
Maximum surface temperature of applied parts
44°C (111 °F)
Flow range (default)
Maximum oxygen input
Oxygen analyzer accuracy
< + 4 % (within the range of 25-95% O2) Operating conditions: 18-28 °C (64-82 “F), 30-7-% RH